Abstract This study aimed to evaluate the effects of the application of 10% sodium ascorbate (SA) after in-office bleaching on the penetration of hydrogen peroxide (HP) into the pulp chamber, color change, and microtensile bond strength (µTBS) to the resin-enamel interface. Thirty premolars and thirty molars were randomly divided into three groups (n = 20 each). One group was exposed to deionized water (negative control). The other two groups were bleached with 35% HP in a single session for 3x15 minutes for each application. However, in only one of them, SA was applied for 10 minutes after bleaching. After, the concentration (µg/mL) of HP in each pulp chamber was evaluated by UV-Vis spectrophotometry. Color changes (ΔEab, ΔE00, and ΔWID) were evaluated with a digital spectrophotometer before and in the first week after bleaching. After treatment, molars were restored and sectioned to obtain resin-enamel interface sticks for µTBS at a crosshead speed of 1 mm/min until failure. The HP concentration and µTBS data were analyzed using one-way ANOVA and Tukey tests, and color changes were analyzed by t-tests (α = 0.05). SA application significantly improved the µTBS values and reduced the HP concentrations within the pulp chambers (p < 0.0001). The application of SA significantly interfered with the color changes after bleaching when compared to the control group (p < 0.05). Application of 10% SA after in-office bleaching successfully reduced the penetration of HP into the pulp chamber; however, it decreased color change.

Resumo Este estudo teve como objetivo avaliar os efeitos da aplicação do ascorbato de sódio a 10% (AS) depois do clareamento em consultório na penetração do peróxido do hidrogênio (PH) na câmara pulpar, mudança de cor e resistência de união (RU) da interface resina-esmalte. Trinta pré-molares e trinta molares foram divididos aleatoriamente em três grupos (n = 20). Um grupo foi exposto em água deionizada (controle negativo). Os outros dois grupos foram clareados com 35% PH numa única sessão de 3x15 minutos para cada aplicação. Porém, só um grupo recebeu AS durante 10 minutos depois do clareamento. Depois, a concentração (µg/mL) do PH no interior de cada câmara pulpar foi avaliado com espectrofotometria UV-Vis. A mudança de cor (ΔEab, ΔE00 and ΔWID) foi avaliada como espectrofotômetro digital antes e depois de uma semana do clareamento. Após de cada tratamento, os molares foram restaurados e seccionados em espécimes com interface resina-esmalte para o teste de RU por microtração a uma velocidade de 1 mm/min até a fratura. Os dados da concentração de PH e RU foram analisados usando ANOVA de uma via e teste de Tukey, e a mudança de cor com o teste t (α = 0.05). A aplicação de AS melhorou significativamente a RU e reduziu a concentração de PH na câmara pulpar (p < 0.0001). A aplicação de AS interferiu significativamente na mudança de cor depois do clareamento comprado com o grupo controle (p < 0.05). A aplicação de SA a 10% depois do clareamento em consultório reduziu significativamente a penetração do PH na câmara pulpar e interferiu na mudança de cor.

Abstract Eugenol is a phenolic compound with numerous biological activities. It is widely used in dentistry to treat toothache and pulpitis. In particular, eugenol may be used for tooth whitening procedures to minimize dental sensitivity in patients. However, eugenol has some disadvantages such as its volatility, its photosensitivity, and immediate effect, which can be avoided by using pharmaceutical nanotechnology. The aim of the present study was to obtain, characterize, quantify, and evaluate the physicochemical stability of eugenol-loaded Eudragit RS100 nanocapsules. The nanocapsules (NCs) were prepared by interfacial deposition of the preformed polymer method. The NCs were characterized through morphological and spectroscopic studies. The encapsulation efficiency was achieved by quantifying the non-encapsulated eugenol using a previously developed and validated analytical method. The physicochemical stability of NCs was assessed at predetermined time intervals for 90 days after preparation. The nanocapsules were successfully prepared by the chosen method and had a predominantly spherical shape with a smooth surface. The mean size, the polydispersion index, and the zeta potential were in agreement to literature data. Infrared spectra ensured that the nanoencapsulation process did not result in chemical reactions between the drug and the polymer. The formulations showed encapsulation efficiency higher than 90% and remained stable after 60 days of preparation. Thus, eugenol-loaded Eudragit RS100 nanocapsules may be further considered as an alternative formulation for dental sensitivity in order to provide a controlled release, a decreased toxicity, and a better dental sensitivity relief.

Abstract Objectives This is a double-blind, split-mouth, randomized clinical study that aims to evaluate the influence of bulk-fill composite packaging presented in syringes (BSy) and capsules (BCa), and the effect of selective enamel etching (SEE) on the clinical performance of class I and II bulk-fill resin composite restorations after 24 months. Methodology A total of 295 class I or class II restorations were performed on 70 patients. One universal adhesive was applied in all restorations. SEE was used in 148 restorations and self-etching mode (SET) in 147 restorations. After the adhesive application, cavities were restored with Filtek Bulk-fill Posterior Restorative in syringes (BSy), Filtek One Bulk-fill in capsules (BCa), or Filtek Supreme Ultra in syringes with the incremental technique (In). All restorations were evaluated using the FDI criteria after one week and after six, 12, and 24 months. Kaplan-Meier survival analysis and Pearson’s Chi-square test were used (α=0.05) for statistical analysis. Results After 24 months, 62 patients were evaluated and four restorations were lost due to fracture (one for SEEBSy, two for SEEIn, and one for SETIn). No significant differences in the fracture and retention rate were found between groups (p>0.05). SEE showed significantly fewer marginal adaptation defects than SET (p<0.05). BCa and BSy groups showed fewer marginal discrepancies compared to In (p<0.05). Restorations performed with BCa showed less color mismatch than BSy or In (p<0.05). Conclusion Although all restorations exhibited satisfactory clinical performance after 24 months of clinical service, the clinical behavior of class I and II restorations’ improved when performed with a bulk-fill composite in capsules, mainly when associated with a universal adhesive applied with SEE.

Abstract Despite the availability of in-office bleaching gels with a 6% concentration of hydrogen peroxide (HP), these gels have not been evaluated in younger patients. They are commercially available with a tip, associated or not with a brush, where the tip with a brush spreads the gel over the entire surface to have a smaller thickness (thin layer) since the manufacturers indicate the application of a thin layer of gel. Objective This randomized, split-mouth, double-blind clinical trial evaluated the efficacy of in-office bleaching with 6% HP in adolescents using different application tips, as well tooth sensitivity (TS) and aesthetic self-perception. Methodology Sixty participants were randomized for 6% HP self-mixing bleaching gel tip design: without brush and with brush. In-office bleaching was performed in 3 sessions of 50 minutes. Color change was evaluated using a digital spectrophotometer (ΔE ab , ΔE 00 , and ΔWI D ) and color guide (ΔSGU), the absolute risk and intensity of TS with a visual analogue scale and aesthetic self-perception with the oral aesthetic scale (a=0.05). Results The groups achieved similar bleaching regardless of the application tip (p>0.05). However, only for ΔWI D , a significant mean difference (MD) was observed in the third week (MD 2.3; 95% CI 1.2 to 3.3; p < 0.001) and at one month (MD 1.6; 95% CI 0.6 to 2.6; p < 0.03) favoring the tip without brush. Regarding TS, 45% in the tip-without-brush group and 33% in the tip-with-brush group reported TS (odds ratio 0.61; 95% CI 0.29 to 1.28; p<0.02), with low TS intensity (MD 0.05; 95% CI -0.06 to 0.17; p>0.36). All patients reported improved aesthetic self-perception after bleaching (MD -1.3; 95% -1.8 to -0.9; p<0.001). Conclusions Regardless of the tip used bleaching with 6% HP achieved a bleaching efficacy and improved the aesthetic self-perception. However, a lower risk of TS for application using the tip with brush was observed.

Resumo Este estudo investigou o efeito do dimetil sulfóxido combinado a agentes de reticulação de colágeno na resistência de união à microtração, infiltração de nitrato de prata e análise do grau de conversão por Micro-Raman de sistemas adesivos universais para a dentina erosionada por refrigerante a base de Cola. Cento e sessenta molares foram divididos em 20 grupos: (1) Tratamento: Dentina sadia; Dentina erosionada; Dentina erosionada tratada com primer de dimetil sulfóxido; Dentina erosionada tratada com primer contendo 6,5% de proantocianidina e; Dentina erosionada tratada com primer contendo 0,1% de rivoflavina; (2) Sistemas adesivos: iBond Universal e Scotchbond Universal; e (3) estratégia adesiva: estratégia condicionamento e lavagem ou autocondicionate. Após a restauração, os espécimes foram seccionados em palitos e testados. Os dados dos três testes foram analisados estatisticamente (ANOVA de 2 e 3 fatores e teste de Tukey; α = 5%). A aplicação de dimetil sulfóxido combinado ou não agentes de reticulação de colágeno melhorou todas as propriedades avaliadas quando comparado a dentina erosionada. Entretanto, apenas quando o dimetil sulfóxido foi combinado com agentes de reticulação de colágeno, os valores de adesão a dentina, infiltração de nitrato de prata e grau de conversão em dentina erosionada foi semelhante a dentina sadia, para os dois adesivos e estratégias adesivas. A aplicação de dimetil sulfóxido combinado com agentes de reticulação de colágeno contribuiu para aumentar a resistência de união e o grau de conversão dentro da camada híbrida na dentina erodida, ao mesmo tempo que reduziu significativamente a nanoinfiltração neste substrato.

Abstract To investigate the effect of the dimethyl sulfoxide combined with cross-linking agents on microtensile bond strength, silver nitrate penetration and in situ degree of conversion analysis of adhesives to the erosive dentin treatment with Cola-based soft drink. One hundred and sixty-six molars were assigned to 20 groups: (1) Treatment: Sound dentin; Erosive dentin; Erosive dentin treated with primer of dimethyl sulfoxide; Erosive dentin treated with DMSO primer containing proanthocyanidin and rivoflavin; (2) Adhesive systems: iBond Universal and Scotchbond Universal; and (3) adhesive strategy: etch-and-rinse or self-etch strategy. After restoration, specimens were sectioned into sticks to be tested. The data from microtensile bond strength (MPa), silver nitrate penetration (%) and in situ degree of conversion (%) were analyzed by (three- and two-factor ANOVA; Tukey's test α=5%). The application of dimethyl sulfoxide combined of not with cross-linkers improved all properties evaluated when compared to only erosive dentin treatment with Cola-based soft drink. However, only when dimethyl sulfoxide was combined to cross-linkers, the values of the microtensile bond strength, silver nitrate penetration and in situ degree of conversion in erosive dentin treatment with Cola-based soft drink was similar to sound dentin, for both adhesives and adhesive strategies. The application of dimethyl sulfoxide combined with the collagen cross-linking agent contributed to increasing the bond strength and degree of conversion in erosive lesion dentin, at the same time that significantly reduction of nanoleakage in this substrate.

Resumo Este ensaio clínico avaliou o efeito da coadministração de ibuprofeno/cafeína na sensibilidade dental decorrente de clareamento (SD). Um estudo clínico randomizado, paralelo, triplo-cego, foi realizado em 84 pacientes que receberam cápsulas de ibuprofeno/cafeína ou placebo. Os fármacos foram administrados por 48 horas, começando 1 hora antes do clareamento em consultório. Duas sessões de clareamento foram realizadas com gel de peróxido de hidrogênio 35% com intervalo de 1 semana. A SD foi registrada até 48 horas após o clareamento dental com uma escala visual analógica (VAS) de 0-10 e uma escala de classificação numérica (NRS) de 5 pontos. A cor foi avaliada com as escalas Vita Classical e Vita Bleachedguide (ΔSGU) e com o espectrômetro Vita Easyshade (ΔE*ab e ΔE00). O risco absoluto de SD em ambos os grupos foi avaliado por meio do teste exato de Fischer. As comparações da intensidade da SD (NRS e VAS) foram realizadas utilizando-se o teste Mann-Whitney e uma ANOVA de dois fatores com medidas repetidas, respectivamente. A alteração de cor entre os grupos foi comparada com a o teste t de Student. O nível de significância foi de 5%. Não houve diferença estatisticamente significante entre os grupos para o risco absoluto de SD (p = 1,00) ou para a intensidade de SD (p > 0,05). Observou-se clareamento de aproximadamente 7 unidades nas escalas Vita Classical e Vita Bleachedguide, sem diferença estatística entre os grupos. Concluiu-se que a coadministração de ibuprofeno e cafeína não reduziu o risco absoluto ou intensidade da SD e não interferiu na eficácia do clareamento dental.

Abstract This clinical trial evaluated the effect of the coadministration of ibuprofen/caffeine on bleaching-induced tooth sensitivity (TS). A triple-blind, parallel-design, randomized clinical trial was conducted on 84 patients who received ibuprofen/caffeine or placebo capsules. The drugs were administered for 48 hours, starting 1 hour before the in-office bleaching. Two bleaching sessions were performed with 35% hydrogen peroxide gel with 1-week interval. TS was recorded up to 48 hours after dental bleaching with a 0-10 visual analogic scale (VAS) and a 5-point numeric rating scale (NRS). The color was evaluated with VITA Classical and VITA Bleachedguide scales (ΔSGU) and VITA Easyshade spectrophotometer (ΔE*ab and ΔE00). The absolute risk of TS in both groups was evaluated using Fischer's exact test. Comparisons of the TS intensity (NRS and VAS data) were performed by using the Mann-Whitney test and a two-way repeated measures ANOVA, respectively. The color alteration between the groups was compared with the Student's t test. The significance level was 5%. There was no statistically significant difference between the groups for the absolute risk of TS (p = 1.00) or for the intensity of TS (p > 0.05). A bleaching of approximately 7 shade guide units was observed on the Vita Classical and Vita Bleachedguide scales, with no statistical difference between the groups. It was concluded that coadministration of ibuprofen and caffeine did not reduce the absolute risk or intensity of TS and did not interfere with the efficacy of dental bleaching.

RESUMO Objetivo: Comparar a efetividade do pré-tratamento com jateamento e desproteinização com NaOCl na resistência de união (SBS), grau de conversão in situ (GC) dos braquetes metálicos ao esmalte fluorótico e o padrão de condicionamento do esmalte. Métodos: Foi utilizado um total de 90 pré-molares superiores livres de cárie. Os dentes foram divididos em seis grupos experimentais, de acordo com: superfície do esmalte (Esmalte Sadio e Fluorótico); tratamento de superfície (Condicionamento com ácido fosfórico a 37% [ER]; Hipoclorito de sódio a 5,2% + ácido fosfórico [NaOCl + ER]; e jateamento + ácido fosfórico [Jateamento + ER]). Após armazenamento em água destilada (37oC/24 h), os espécimes foram testados a 1 mm/min até a falha (SBS). As interfaces esmalte-cimento foram avaliadas para GC usando espectroscopia micro-Raman. O padrão do condicionamento do esmalte foi avaliado sob microscopia eletrônica de varredura. Os dados da SBS e GC foram analisados utilizando ANOVA dois fatores e teste de Tukey (α= 0,05). O padrão de condicionamento do esmalte foi avaliado apenas qualitativamente. Resultados: Para o esmalte sadio, o ER apresentou os maiores valores de SBS, quando comparado aos grupos NaOCl + ER e Jateamento + ER (p< 0,01). Em relação ao GC, apenas a média do grupo NaOCl + ER foi comprometida significativamente em comparação aos outros grupos (p= 0,002). Para o esmalte fluorótico, Jateamento + ER aumentou significativamente a média dos valores de SBS, em comparação com o grupo ER (p= 0,01) e nenhuma mudança significativa foi observada no GC (p> 0,52). Conclusões: A aplicação de NaOCl ou jateamento associado ao ácido fosfórico melhorou a SBS dos braquetes no esmalte fluorótico sem comprometer o GC do cimento resinoso, com a melhoria do condicionamento interprismático do esmalte.

ABSTRACT Objective: To compare the effectiveness of the pretreatment with sandblasting and deproteinization with NaOCl on bond strength (SBS), in situ conversion degree (CD) of brackets in fluorotic enamel, and enamel etching pattern. Methods: A total of 90 non-carious maxillary premolars were used. The teeth were then assigned to six experimental groups according to: enamel surface (sound and fluorotic enamel); surface treatment (Regular etch with 37% phosphoric acid [RE]; 5.2% sodium hypochlorite + phosphoric acid [NaOCl + RE]; sandblasting + phosphoric acid [sandblasting + RE]). After storage in distilled water (37°C/24h), the specimens were tested at 1 mm/min until failure (SBS). Enamel-resin cement interfaces were evaluated for CD using micro-Raman spectroscopy. The enamel-etching pattern was evaluated under a scanning electron microscope. Data from SBS and in situ CD values were analyzed using ANOVA two-away and Tukey test (α=0.05). The enamel etching pattern was evaluated only qualitatively. Results: For sound enamel, RE showed the highest SBS values, when compared to NaOCl + RE and Sandblasting + RE groups (p< 0.01). Regarding CD, only NaOCl + RE significantly compromised the mean DC, in comparison with other groups (p= 0.002). For fluorotic enamel, the Sandblasting + RE group significantly increased the mean SBS values, in comparison with RE group (p= 0.01) and no significant change was observed for CD (p> 0.52). Conclusions: The application of NaOCl or sandblasting associated to phosphoric acid improved the SBS of the brackets in fluorotic enamel without compromising the CD of the resin cement, with improving of enamel interprismatic conditioning.

Resumo Este estudo teve como objetivo quantificar a permeabilidade do peróxido de hidrogênio (PH), avaliação da mudança de cor, morfologia da superfície e composição de elementos após a aplicação de agentes dessensibilizantes antes do clareamento em consultório. Cinquenta pré-molares foram seccionados, um tampão de acetato foi colocado na câmara pulpar e divididos em cinco grupos (n=10). No grupo controle positivo, apenas o gel clareador em consultório foi utilizado e no grupo controle negativo nenhum tratamento foi realizado. Foram aplicados três agentes dessensibilizantes diferentes: grupo KF2%®; grupo Mi Paste® e Desensibilize Nano-P®. O procedimento de clareamento foi realizado com PH a 35%. A absorbância da solução resultante foi determinada em um espectrofotômetro. A mudança de cor foi avaliada utilizando um espectrofotômetro digital. Quatro pré-molares adicionais foram atribuídos aos mesmos grupos acima para análise em microscópio eletrônico de varredura, bem como para avaliar a composição elementar com espectrometria de energia dispersiva por raios-X. Os dados foram submetidos ao teste ANOVA e Tukey (a=0,05). Todos os produtos reduziram a penetração de PH na câmara pulpar. Mi Paste e Nano P foram os produtos que apresentaram a menor penetração de PH, semelhante ao grupo controle negativo (p<0,001). Nenhuma diferença significativa foi detectada na mudança de cor (p<0,001). Em relação à morfologia do esmalte, os grupos analisados após o clareamento apresentou maior deposição de agentes dessensibilizantes na superfície. O uso de agentes dessensibilizantes antes do clareamento dental parece ser uma alternativa para reduzir os efeitos adversos no dente.

Abstract This study aimed to quantify the penetration of hydrogen peroxide, color change evaluation, surface morphology, and composition after application of desensitizing agents before in-office bleaching. Fifty premolars were sectioned, an acetate buffer was placed in the pulp chamber and divided into five groups (n=10). In the positive control group, only the in-office bleaching gel was used, and in the negative control group, no treatment was used. Three different desensitizing agents were applied: Desensibilize KF2%® group; Mi Paste® group, and Desensibilize Nano-P® group. The bleaching procedure was carried out with 35% HP. The absorbance of the resulting solution was determined in a spectrophotometer. Color change was assessed by using a digital spectrophotometer. Four additional premolars were assigned to the same groups above for analysis under scanning electron microscope, as well as to evaluate the elemental composition with X-ray dispersive energy spectrometry. Data were subjected to ANOVA and Tukey's test (α=0.05). All products reduced the penetration of HP in the pulp chamber. Mi Paste and Nano P were the products that yielded the lowest HP penetration, which was similar to the negative control group (p<0.001). No significant difference was detected in color change (p<0.001). Concerning enamel morphology, the groups that were analyzed after bleaching were observed a greater deposition of desensitizing agents on the surface. The use of desensitizing agents before tooth bleaching seems to be an alternative to reduce adverse effects of the tooth.

ABSTRACT Introduction: Edentulism is total or partial tooth loss mainly caused by dental caries and periodontal disease. It is a gradual process often associated to aging. At present edentulism is considered to be a disability, due to the functional limitations undergone by sufferers. Objective: Describe the multidisciplinary, functional and esthetic rehabilitation treatment provided to a patient with occlusal disharmony. Case presentation: A 74-year-old male patient was diagnosed with bimaxillary partial edentulism based on clinical and radiographic examination. The patient underwent generalized periodontal therapy, pre-prosthetic surgery, direct and indirect occlusal plane restoration, and oral rehabilitation with total upper and partial lower removable prostheses, as a result of which he recovered his functionality, esthetic appearance and self-esteem. Conclusions: Edentulism triggers changes in the functional and emotional state of patients. Comprehensive diagnosis and orderly multidisciplinary treatment led to success in the case herein presented.

RESUMEN Introducción: El edentulismo es la pérdida total o parcial de dientes, ocasionado principalmente por la caries y la enfermedad periodontal; es un proceso gradual que está comúnmente asociado al aumento de edad. Actualmente es considerado una discapacidad debido a la limitación funcional que ocasiona en quien lo presenta. Objetivo: Exponer el tratamiento rehabilitador multidisciplinario, funcional y estético en un paciente con desarmonías oclusales. Presentación del caso: Paciente masculino de 74 años, diagnosticado con edentulismo parcial bimaxilar, mediante examen clínico y radiológico. Se sometió a terapia periodontal generalizada, cirugía preprotésica, restauración de plano oclusal de forma directa e indirecta y rehabilitación bucal con prótesis removibles total superior y parcial inferior; lo cual le permitió recuperar funcionalidad, estética y autoestima. Conclusiones: El edentulismo desencadena alteración en el estado funcional y emocional del paciente. Un diagnóstico integral y plan de tratamiento multidisciplinario y ordenado desencadenó éxito en el presente caso.

Abstract Dual-cured buildup composites and simplified light-cured adhesive systems are mixed with a chemical activator to prevent the incompatibility between them. Objective: To evaluate microshear bond strength (μSBS) and nanoleakage (NL) of three universal adhesives used under buildup composites using different curing modes, at baseline and after 6-months (6m). Methodology: Dentin specimens of 55 molars were assigned to: Clearfil Universal Bond[CFU], Prime&Bond Elect[PBE] and One Coat 7 Universal[OCU]. All-Bond Universal[ABU] and Adper Scotchbond Multi-Purpose[SMP] were used as controls. CFU, PBE, and OCU were: light-cured [LC], dual-cured using a self-curing activator [DC], and self-cured, using a self-curing activator and waiting for 20 min [SC]. Upon the application of the adhesive, transparent matrices were filled with a dual-cured buildup composite and light cured, then tested in mSBS. For NL, the specimens were submersed in ammoniacal silver nitrate and sectioned to observe under the SEM. Three-way ANOVA and Tukey's test were applied (α=0.05). Results: OCU/LC-PBE/LC resulted in higher mean μSBS than ABU/LC. For SMP/DC higher mean μSBS were obtained than for both CFU/DC and OCU/DC (baseline). No universal adhesive was significantly affected by curing mode or storage time. CFU, PBE, and OCU did not undergo significant changes in any curing mode (p>0.05). NL (baseline) PBE/LC resulted in higher %NL compared to ABU/LC. SMP/DC resulted in higher %NL than CFU/DC-OCU/DC. CFU/LC/DC resulted in lower %NL than CFU/SC. PBE/SC resulted in lower %NL than PBE/DC. OCU/LC/SC showed lower %NL than OCU/DC. OCU showed significant lower %NL than CFU and PBE. All CFU groups, as well as OCU/SC, resulted in increased %NL at 6m when compared with baseline. Conclusion: For universal adhesives used in etch-and-rinse mode, self-cured activator and different curing modes did not influence μSBS. However, some interactions were observed for NL, but this influence was material-specific.

Abstract Objectives This randomized, split-mouth, single-blinded trial assessed whether the use of reservoirs in at-home bleaching trays is equivalent to non-reservoir trays. Our choice of an equivalence trial was based on the expectation that a non-reservoir tray is sufficient to produce a color change. Secondary outcomes such as tooth sensitivity (TS) and gingival irritation (GI) were also assessed. Methodology Forty-six patients were selected with canines shade A2 or darker. In half of the patient’s arch, bleaching trays were made with reservoirs and the other half, without reservoirs. At-home bleaching was performed with carbamide peroxide (CP) 10% (3 h daily; 21 days). Color change was evaluated with a digital spectrophotometer (ΔE, ΔE00, and Whiteness Index) and shade guide units (ΔSGU) at baseline, during and one-month post-bleaching. TS and GI were assessed with a numeric scale (NRS) and a visual analog scale (VAS). Results After one month, the equivalence of reservoir and non-reservoir groups were observed in all color instruments (p>0.05). Fifteen and sixteen patients presented pain (absolute risk: 33% and 35%, 95%, confidence interval (CI) 21-46% and 23-49%) in the reservoir and non-reservoir side, respectively. The odds ratio for pain was 0.8 (95%CI 0.2-3.0) and the p-value was non-significant (p=1.0). TS intensity was similar between both groups in any of the pain scales (p>0.05). No difference in the GI was observed (p>0.05). Conclusions The protocol with reservoirs is equivalent in color change to the non-reservoir, although no superiority of the latter was observed in terms of reduced TS and GI with at-home 10% carbamide peroxide bleaching. Clinical Relevance The presence of reservoirs in a bleaching tray did not improve color change or affect tooth sensitivity and gingival irritation.

Resumo Este ensaio clínico avaliou o efeito do uso preemptivo do anti-inflamatório não-esteroidal piroxicam em dose única 30 minutos antes do clareamento de consultório na prevenção de sensibilidade dentária (SD) relatada pelos pacientes. Cinquenta pacientes foram submetidos a duas sessões de clareamento dental em consultório com peróxido de hidrogênio a 35% por 2 sessões, consistindo de aplicação única de 45 minutos, com um intervalo de 7 dias entres as sessões. Trinta minutos antes do procedimento, o paciente recebia aleatoriamente dose única de piroxicam (200 mg) ou do placebo em um desenho duplo-cego, randomizado e cruzado. A SD foi avaliada usando a escalas de gradação verbal (EGV) e visual analógica (EVA) durante o procedimento clareador e 24h após o procedimento. As mudanças de cor foram avaliadas usando a escala Vita Bleachedguide uma semana após cada sessão de clareamento. O risco de SD foi calculado a partir de EGV a analisado pelo teste de McNemar, enquanto o nível de SD foi analisada pelo teste de Mann-Whitney. Para EVA, testes T foram usados para comparar dados dos tratamentos em cada tempo de avaliação. Dados de mudança de cor foram submetidos aos testes de Wilcoxon e Mann-Whitney (α=0.05). A administração preemptiva de piroxicam não afetou o risco e nível de SD quando comparado ao placebo, independentemente do tempo de avaliação. A sequencia de tratamento não afetou a efetividade do clareamento. Como conclusão, a administração de dose única de piroxicam previamente ao clareamento dental de consultório não foi efetiva em reduzir significantemente o risco e nível de SD.

Abstract This clinical trial evaluated the effect of preemptive use of the non-steroidal anti-inflammatory drug piroxicam in a single dose 30 min prior to in-office bleaching on the prevention of tooth sensitivity (TS) reported by patients. Fifty patients were submitted to two sessions of in-office tooth bleaching with 35% hydrogen peroxide used for 2 sessions, each consisting of a single 45-min application, with an interval of 7 days between session. Thirty minutes prior to the procedure, the patient randomly received a single dose of piroxicam (200 mg) or placebo in a double-blind, randomized, crossover design. The TS was evaluated using verbal rate (VRS) and visual analog (VAS) scales during the bleaching procedure and at 24 h after each session. The color changes were assessed by the Vita Bleachedguide scale 1 week after each bleaching session. Risk of TS was calculated from the VRS and analyzed by the McNemar test, while the level of TS was analyzed by the Mann-Whitney test. For the VAS, t-tests were used to compare data from the treatments at each assessment time. Data regarding color changes were subjected to Wilcoxon and Mann-Whitney tests (α=0.05). The preemptive administration of piroxicam did not affect the risk and level of TS compared to placebo, irrespective of the assessment time. The treatment sequence did not affect bleaching effectiveness. In conclusion, the administration of a single dose of piroxicam prior to in-office tooth bleaching was unable to significantly reduce the risk and level of TS.

Resumo Para responder a seguinte questão de pesquisa através de uma revisão sistemática: "O risco e a intensidade de sensibilidade dentária (SD) e eficácia de clareamento são diferentes entre pacientes adultos que realizam clareamento caseiro usando moldeiras com reservatórios e aqueles que usam moldeiras sem reservatórios?”. Uma pesquisa abrangente foi realizada no MEDLINE via PubMed, Scopus, Web of Science, Literatura Latino-Americana e do Caribe em Ciências da Saúde (LILACS), Biblioteca Cochrane e literatura cinzenta, sem restrições. Os resumos da conferência anual da Associação Internacional para Pesquisa Dental além de estudos registrados ou em andamento também foram pesquisados. Dissertações e Teses foram pesquisados utilizando o Capes Journal Dissertações e Teses ProQuest. Apenas ensaios clínicos randomizados (ECR) foram incluídos. Usamos a ferramenta Risk of Bias (RoB) da Cochrane para avaliação de qualidade. Após a remoção de duplicatas, triagem de título e resumo e exame de texto completo, nove ECRs permaneceram para análises qualitativas. A grande maioria dos estudos não relatou o método de randomização, ocultação de alocação e cegamento do examinador durante a avaliação de cores. Dos nove estudos, oito estavam sob risco claro de viés. Em relação à mudança de cor, quatro estudos não relataram nenhuma mudança e dois relataram melhora na mudança de cor com reservatórios. Apenas quatro estudos registraram a sensibilidade dentária e não relataram diferenças significativas. Apenas um estudo relatou maior irritação gengival com reservatórios. A falta de relatórios de dados nos impediu de executar uma meta-análise. Outros ECR bem desenhados devem ser conduzidos para responder a esta questão de pesquisa. Até agora não há evidências que sustentem que reservatórios em moldeiras de clareamento melhorem a mudança de cor. PROSPERO - CRD42016037628

Abstract To answer the following focused question through a systematic review: “Are the risk and intensity of tooth sensitivity (TS) and bleaching efficacy different between adult patients who undergo at-home bleaching using trays with reservoirs and those who use trays without reservoirs?”. A comprehensive search was performed in the MEDLINE via PubMed, Scopus, Web of Science, Latin American and Caribbean Health Sciences Literature database, Brazilian Library in Dentistry, Cochrane Library, and grey literature without restrictions. Abstracts from conferences; unpublished and ongoing trial registries, dissertations and theses (ProQuest Dissertations and Periódicos Capes Theses databases) were searched. Only randomized clinical trials (RCTs) were included. We used the Risk of Bias tool (RoB) from the Cochrane Collaboration for quality assessment. After the removal of duplicates, title and abstract screening and full-text examination, nine RCTs remained for qualitative analyses. The great majority of the studies did not report the method of randomization, allocation concealment, and examiner blinding during color assessment. From the nine studies, eight were at unclear risk of bias. In regard to color change, four studies reported no change and two reported improved color change with reservoirs. Only four studies recorded tooth sensitivity and they reported no significant differences. Only one study reported greater gingival irritation with reservoirs. Lack of data reporting prevented us from running a meta-analysis. Further well-designed RCT should be conducted to answer this research question. So far there is not evidence to support that reservoirs in bleaching trays improve color change. PROSPERO - CRD42016037628

Resumo Avaliar o efeito da combinação de ácido fluorídrico ou silano com o primer autocondicionante de cerâmicas sobre a eficácia da união imediata e após 1 ano de armazenamento em água, padrão de condicionamento e interação química desses tratamentos com o dissilicato de lítio. Um total de 16 blocos CAD/CAM de dissilicato de lítio (DL) foram cortados em quatro seções quadradas (n=64). Os espécimes de DL foram divididos em 4 grupos: 1) ácido fluorídrico a 5% + silano (HF + SI); 2) primer autocondicionante de cerâmica (MEP); 3) HF + MEP; 4) MPE + SI. Após cada tratamento, o sistema adesivo foi aplicado e as matrizes Tygon foram preenchidas com cimento resinoso dual (Variolink® II), seguido de fotopolimerização. Espécimes em forma de cilindro (0.8 mmÆ x 0.5 mm), foram armazenados em água (37 °C por 24h ou 1 ano) e submetidos ao teste μSBS (ANOVA dois fatores e teste de Tukey; a=0,05). Para avaliação das interações químicas por Espectroscopia Raman, os espécimes de DL foram divididos em 3 grupos (n=4): 1) sem tratamento (DL); 2) HF + SI; e 3) MEP. Para avaliação do padrão de condicionamento da superfície cerâmica após os tratamentos por MEV, os espécimes de DL foram divididos em 3 grupos (n=3): 1) DL; 2) HF; 3) MEP; e 4) HF + MEP. Ambos os métodos foram avaliados apenas qualitativamente. Não foi observada diferença significativa na μSBS imediata entre os grupos (p=0,73), mas após 1 ano de armazenamento das amostras em água, reduziu μSBS (p>0,0001). HF ou HF + MEP produziram uma maior dissolução da matriz vítrea do que o uso de MEP sozinho. Após a aplicação de SI e MEP, observou-se redução de ligações de siloxano, sugerindo o acoplamento da camada de silano na superfície do DL. O primer autocondicionante cerâmico pode ser uma alternativa ao tratamento cerâmico tradicional, uma vez que a interação química e a resistência de união a longo prazo, quando comparada ao tratamento tradicional foram estatisticamente semelhantes. A associação de ácido fluorídrico ou agente de acoplamento silano com um primer autocondicionante de cerâmicas não agregou nenhum benefício em termos de interação química e estabilidade.

Abstract To evaluate the effect of combining 5% hydrofluoric acid (HF) and silane (SI) with the self-etching ceramic primer on the immediate and after 1-year of water storage on bonding efficacy, conditioning pattern (CP) and chemical interaction (CI) to the lithium disilicate. A total of 16 CAD/CAM blocks of lithium disilicate (LD) were cut into four square sections (n=64). For bonding efficacy evaluation, the LD specimens were divided into 4 groups (n=10): 1) HF+SI; 2) self-etching ceramic primer (MEP); 3) HF+MEP; 4) MEP+SI. After each treatment, an adhesive system was applied and Tygon matrices were filled with a dual-cured resin cement followed by light curing. Cylinder specimens (0.8 mmx0.5mm) were stored in water (37 °C for 24 h or 1-year) and submitted to the μSBS test (2-way ANOVA and Tukey’s test; a=0.05). CP and CI were only evaluated qualitatively. No significant difference on the μSBS was observed between groups (p=0.73), but reduced μSBS was observed after 1-year of water storage (p>0.0001). After application of HF+SI and MEP, reduction in a number of siloxane bonds was observed, suggesting the coupling of SI on the LD surface. HF or HF+MEP produced a higher dissolution of the glassy matrix than the use of MEP alone. The MEP can be an alternative to traditional ceramic treatment once the chemical interaction and long-term bond strength were similar between both groups. The association of hydrofluoric acid or silane with a self-etching ceramic primer did not add any benefits in terms of chemical interaction and bonding stability.

Abstract The objective of this study is to compare the resin-enamel bond strength (mμSBS), in-situ degree of conversion (DC), and the enamel-etching pattern (SEM/EDX) of universal adhesive systems when applied to sound and fluorotic enamel. Ninety-eight human molars were sectioned into 4 parts and divided into 24 groups according to 1) enamel surface (sound or fluorotic enamel), 2) adhesive system (Clearfil Universal Bond [CUB], Futurabond U [FBU], iBond Universal [IBU], and Scotchbond Universal [SBU]), and 3) application mode (etch-and-rinse [ER], active self-etch [Active-SE], and passive self-etch [Passive-SE]). Specimens were stored at 37 °C, for 24 hours and tested at 1.0 mm/min (μSBS). Enamel–resin interfaces were evaluated for in-situ DC. The enamel-etching pattern was evaluated under a SEM/EDX. Data from mμSBS and in-situ DC was analyzed using a three-way ANOVA and Tukey’s test at 5 % level of significance. For all adhesives, the ER resulted in a statistically significant higher mean mμSBS than the passive-SE in both substrates (p < 0.001). For all adhesives, active-SE resulted in mean mμSBS (p > 0.31) and in-situ DC (p > 0.45) that were statistically similar to those obtained with the ERs in both substrates. A statistically significant, higher mean mμSBS and in-situ DC were obtained in sound enamel (p < 0.001) than in fluorotic enamel. In general, SBU showed higher mean values for mμSBS and in-situ DC compared to those of CUB and IBU (p < 0.001). ER and active-SE showed the deepest enamel-etching pattern in both substrates. A higher amount of fluor was observed in fluorotic enamel. The active application of universal adhesives in the SE-mode may be a viable alternative to increase the adhesive properties in sound and fluorotic enamel.